ZM
The power supplies in the basic version have an option of setting the output voltage with a switch accessible on the bottom side of the casing and with the Uo potentiometer accessible on the front panel. The adjustment range of the potentiometer is ± 5% of the value set with the switch.
All power supplies have a UPI output characteristic (voltage stabilization, power limitation and current stabilization) with additional short-circuit current limitation of up to about 1/3 of the nominal current. The actual levels of power and current limitation are slightly higher than their nominal values. The characteristics of power limitation and output current are automatically adjusted downwards if the inside of the power supply overheats above 75ºC. The standard power supplies are equipped with the LED and relay signalization.
- one output
- current limitation
- voltage regulation on front panel
- overvoltage protection
- active PFC
- powered with 230Vac or 220Vdc
- voltage versions of 12, 24, 48, 110, 220Vdc
- possibility to select terminals on front panel
- many product versions for various mounting possibilities
- relay indication of correct operation of power supply
- optical signalization of correct operation and current limitation.
Name | Nominal output voltage | Output current | Additional data | |
---|---|---|---|---|
ZM12V10A-151-00 |
12V
|
10A
|
||
ZM12V16A-300-00 |
12V
|
16A
|
||
ZM12V32A-600-00 |
12V
|
32A
|
||
ZM24V6A-151-00 |
24V
|
6A
|
||
ZM24V12A-300-00 |
24V
|
12A
|
||
ZM24V24A-600-00 |
24V
|
24A
|
||
ZM48V3A-151-00 |
48V
|
3A
|
||
ZM48V6A-300-00 |
48V
|
6A
|
||
ZM48V12A-600-00 |
48V
|
12A
|